





Wall Cloth Tips
Construction Method Of Wall Cloth
1. The wal surface shall be flat and clean without loosenes2.Use the special tools for pasting wallpaper, the best choice is the imported wallpaper knife.3.Adjust the wallpaper adhesive according to the proportion, and roll and brush the wallpaper adhesivewall to ensure that the wall cloth is pasted evenly.from a certain internal corner of theght of the upper section is the same as the height of4.Place the wall cloth straight alongwall cloth up to the skirting line. Roll outthe wall, and use an object at the lower end to pacpaste the wall cloth on the wal.The sequence isthe wall cloth, and use the wallpaper scraper to scrapefrom the inside to the side. After the wall cloth is pasted up and down, continue to pave according to thissequence.
5.f the internal corner is straight, rolling construction can be continued without cutting. if the internalcorner is not straight, lap cutting can be carried out at the internal corner.
6.lf two people cooperate, the speed will be faster, the length between the two internal corners can bemeasured, and a little space will be left. After cutting the cloth, two people will straighten the two endsfrom top to bottom, from inside to side for scraping.7.Wipe off excess glue with a clean wet towe!8.After pasting, conduct a comprehensive inspection. if bubbles or bubbles are found, use the needle todeflate and scrape flat, f the bubbles are due to lack of glue, use the needle to inject glue and scrape flat.